|
 For drilling 4 5/8" to 5 1/2" holes |
||||||
| The EEI-4000 is a valveless pneumatic tool with a unique design that makes it one of the most powerful and universal hammers on today's market. The simple design of this tool means hole after hole of trouble free drilling which translates into profit and that's the bottom line on any tool. Combine these features with the qualified support Epley gives its customers and you have a top of the line tool. |
|
 |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Standard
(warranty) bit sizes 4 5/8"-5 1/2" Epley Enterprises also offers a complete line of bits and hole openers for your new 4000 Titandrill. All Epley Enterprises, Inc. products are guaranteed to be within industry accepted tolerances and specifications.To remove cuttings effectively, annular air velocity should be 4,000 to 5,000 ft/min. Annular velocity is governed by air consumption of the hammer, the size bit used to drill the hole, and the drill pipe size to which the hammer is attached. Decreasing the bit size or increasing the diameter of the drill pipe will increase the annular velocity. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
P.O. Box 3641
San Angelo, TX. 76902
Phone: (325)-651-8811
FAX (325)-651-8822
1-800-334-2487
Copyright © 2000 Epley Enterprises, Inc.
